Electronic Neon Power Supply
Indoor Type 7


  • Exclusive Ventex GTO Lead Clamping System
  • Pull-chain on/off switch
  • Unit will not trip on capacitive currents up to 15mA
  • Line load regulated (30mA self-adjusting Output regardless of load size or input voltage fluctuations)
  • Grounding connection via mounting foot
  • Ten-foot power cord (3 Pin)
  • UL 2161 listed
  • Complies with CSA22.2, No. 107.1, No. 13
  • High power factor (energy saving/cost effective)
  • Open circuit, short circuit and ground fault protection

Exclusive: These units are protected by Ventex’s patented protective circuitry to prevent false tripping due to capacitive current. Patent #5892646

2-Year Warranty


Input Voltage 120VAC (+/-10%) 50/60 Hz
Input Current 1.25A rms
Power Factor 0.93
Output Frequency Variable
Output Voltage 0V-12,000V
Output Current 30mA
Operating Temperature 32ºF to 104ºF/ 0ºC to 40ºC
Driving Distance** (Based on Standard 12mm tube. Deduct one foot from driving footages for each pair of electrodes.)
Neon 5-35 ft (1.5-10.7 m)
Mercury 5-41 ft (1.5-12.5 m)

**See Ventex Luminous Tube Footage Chart for more information.



Length (A) 6.63 in 16.8 cm
Width (B) 3.15 in 8.0 cm
Height (C) 2.0 in 5.0 cm
Mounting (D) 6.0 in 15.2 cm
Mounting (E) 2.25 in 5.7 cm
Weight 32.0 oz 907 g
Power Cord 10.0 ft 3.0 m
GTO Leads GTO Clamping System*

*Exclusive: Ventex GTO Lead Clamping system allows for easy field installation of properly sized GTO. Requirements: minimum of 10kV rated; 0.252 in. OD +/- 0.01; 4.0 ft maximum length for each output lead. Please refer to complete instructions in manual in box. Ventex GTO Kit available: Part Number 85340 GTO-10 Kit (8 ft)